Difference between revisions of "Grove"

Revision as of 21:33, 9 September 2025

Arduino Grove.

@@ Line 85: / Line 85: @@
 [[Bibliothèque Wi-Fi ESP32 | Bibliothèque Wi-Fi ESP32]]<br>
-<b>WiFiScan</b>
-<PRE>
-/*
-  Example from WiFi > WiFiScan
-  Complete details at https://RandomNerdTutorials.com/esp32-useful-wi-fi-functions-arduino/
-*/
-#include "WiFi.h"
-void setup() {
-  Serial.begin(115200);
-  // Set WiFi to station mode and disconnect from an AP if it was previously connected
-  WiFi.mode(WIFI_STA);
-  WiFi.disconnect();
-  delay(100);
-  Serial.println("Setup done");
-}
-void loop() {
-  Serial.println("scan start");
-  // WiFi.scanNetworks will return the number of networks found
-  int n = WiFi.scanNetworks();
-  Serial.println("scan done");
-  if (n == 0) {
-      Serial.println("no networks found");
-  } else {
-    Serial.print(n);
-    Serial.println(" networks found");
-    for (int i = 0; i < n; ++i) {
-      // Print SSID and RSSI for each network found
-      Serial.print(i + 1);
-      Serial.print(": ");
-      Serial.print(WiFi.SSID(i));
-      Serial.print(" (");
-      Serial.print(WiFi.RSSI(i));
-      Serial.print(")");
-      Serial.println((WiFi.encryptionType(i) == WIFI_AUTH_OPEN)?" ":"*");
-      delay(10);
-    }
-  }
-  Serial.println("");
-  // Wait a bit before scanning again
-  delay(5000);
-}
-</PRE>
 == Matériel pour ESP32 ==