Grove - Temperature Sensor

Grove - Temperature Sensor (Seeed-Studio)

Caractéristiques

Temperature Sensor v1.2
Thermistance: NCP18WF104F03RC (NTC)

Tableau

Seeed-Studio

Seeeduino	Sensor
5V	Red
GND	Black
Not Conencted	White
A0	Yellow
Grove - Temperature Sensor -

Support

Connecter le 'Grove - Temperature Sensor' au connecteur A0

Voltage

3.3 ~ 5V

Port

connectez au port A0

Code Exemple

	// Demo code for Grove - Temperature Sensor V1.1/1.2
	// Loovee @ 2015-8-26

	#include <math.h>

	const int B = 4275;               // B value of the thermistor
	const int R0 = 100000;            // R0 = 100k
	const int pinTempSensor = A0;     // Grove - Temperature Sensor connect to A0

	void setup()
	{
		Serial.begin(9600);
	}

	void loop()
	{
		int a = analogRead(pinTempSensor);

		float R = 1023.0/a-1.0;
		R = R0*R;

		float temperature = 1.0/(log(R/R0)/B+1/298.15)-273.15; // convert to temperature via datasheet

		Serial.print("temperature = ");
		Serial.println(temperature);

		delay(1000);
	}

Résultat

pas oublier d'indiquer 9600

Code avec Oled

// Demo code for Grove - Temperature Sensor V1.1/1.2
	// Loovee @ 2015-8-26

  #include <Arduino.h>
  #include <U8x8lib.h>
  #include <Wire.h>

	U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(/* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);   // OLEDs without Reset of the Display

	#include <math.h>

	const int B = 4275;               // B value of the thermistor
	const int R0 = 100000;            // R0 = 100k
	const int pinTempSensor = A0;     // Grove - Temperature Sensor connect to A0

	void setup()
	{
		u8x8.begin();
  	u8x8.setFlipMode(1);   // set number from 1 to 3, the screen word will rotary 180

		Serial.begin(9600);
	}

	void loop()
	{
		int a = analogRead(pinTempSensor);

		float R = 1023.0/a-1.0;
		R = R0*R;

		float temperature = 1.0/(log(R/R0)/B+1/298.15)-273.15; // convert to temperature via datasheet

	  u8x8.setFont(u8x8_font_chroma48medium8_r);
	  u8x8.setCursor(4, 10);
  	  u8x8.print("T = ");
	  u8x8.print(temperature);

		Serial.println("temperature = ");
		Serial.println(temperature);

		delay(1000);
	}

Liens internes

Main page

Liens externes

www.seeedstudio.com/category/Grove-Temperature-Sensor-p-774.html shop
github.com/SeeedDocument/Seeed-WiKi/blob/master/docs/Grove-Temperature_Sensor.mdgithub
wiki.seeedstudio.com/Grove-Temperature_Sensor_V1. wiki