OLED Display 0.96

Grove - OLED Display 0.96 inches (Seeed-Studio)

Caractéristiques

Dot Matrix 128×64

I2C : Address 0x3C

Support

Drivers

SSD1308 chip
LY190-128064

Voltage

3.3 ~ 5.5V

Code

Exemple "Hello World!"
il faut sauvegarde sous 'OLED_Hello_World.ino'
on trouve Wire.h ici C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\Wire\src\Wire.h

#include <Wire.h>
#include <SeeedOLED.h>
void setup()
{
 Wire.begin();
 SeeedOled.init();                    //initialze SEEED OLED display
 SeeedOled.clearDisplay();            //clear the screen and set start position to top left corner
 SeeedOled.setNormalDisplay();        //Set display to normal mode (i.e non-inverse mode)
 SeeedOled.setPageMode();             //Set addressing mode to Page Mode
 SeeedOled.setTextXY(0,0);            //Set the cursor to Xth Page, Yth Column  
 SeeedOled.putString("Hello World!"); //Print the String
}
void loop()
{ 
}

OLED_Hello_World.ino
Télécharger les sources sur GitHub

Liens internes

Main page

---

Liens externes

www.seeedstudio.com/Grove-OLED-Display-0-96.html shop

wiki.seeedstudio.com/Grove-OLED_Display_0.96inchwiki
github.com/Seeed-Studio/OLED_Display_128X64 github