ReSpeaker 4-Mic Array for Raspberry Pi

ReSpeaker 4-Mic Array

Version pour Raspberry Pi

Montage

---

Assurez-vous que les broches sont correctement alignés.

Attention le branchement à chaud peut endommager ReSpeaker .

Veuillez faire l’assemblage avec le Raspberry Pi une fois cette dernière éteint (Power Off)

section 3

Step 2. Get the seeed voice card source code.

	sudo apt-get update
	sudo apt-get upgrade
	git clone https://github.com/respeaker/seeed-voicecard.git
	cd seeed-voicecard
	sudo ./install.sh
	reboot

section 4

Step 3. Then select the headphone jack on Raspberry Pi for audio output:

	sudo raspi-config
	# Select 7 Advanced Options
	# Select A4 Audio
	# Select 1 Force 3.5mm ('headphone') jack
	# Select Finish

section 5

Step 4. Check that the sound card name looks like this:

	pi@raspberrypi:~/seeed-voicecard $ arecord -L
	null
		Discard all samples (playback) or generate zero samples (capture)
	playback
	capture
	dmixed
	array
	ac108
	default:CARD=seeed4micvoicec
		seeed-4mic-voicecard,
		Default Audio Device
	sysdefault:CARD=seeed4micvoicec
		seeed-4mic-voicecard,
		Default Audio Device
	dmix:CARD=seeed4micvoicec,DEV=0
		seeed-4mic-voicecard,
		Direct sample mixing device
	dsnoop:CARD=seeed4micvoicec,DEV=0
		seeed-4mic-voicecard,
		Direct sample snooping device
	hw:CARD=seeed4micvoicec,DEV=0
		seeed-4mic-voicecard,
		Direct hardware device without any conversions
	plughw:CARD=seeed4micvoicec,DEV=0
		seeed-4mic-voicecard,
		Hardware device with all software conversions